Skip to main content

Removing the light path diagnostics panel

Use this information to remove the light path diagnostics panel.

Before you remove the light path diagnostics panel, complete the following steps:
  1. Read Safety and Installation guidelines.
  2. If the compute node is installed in a Lenovo Flex System chassis, remove it (see Removing a compute node from a chassis for instructions).
  3. Carefully lay the compute node on a flat, static-protective surface, orienting the compute node with the bezel pointing toward you.

To remove the light path diagnostics panel, complete the following steps.
remove the light path diagnostics panel

  1. Remove the cover (see Removing the compute node cover).
  2. Pull the light path diagnostics panel out of the bracket.
  3. Disconnect the cable from the system board.
  4. Lift the light path diagnostics panel from the compute node.
If you are instructed to return the light path diagnostics panel, follow all packaging instructions, and use any packaging materials for shipping that are supplied to you.