Skip to main content

Removing the front handle

Use this information to remove the front handle.

Before you remove the front handles, complete the following steps:
  1. Read Safety and Installation guidelines.
  2. If the compute node is installed in a Lenovo Flex System chassis, remove it (see Removing a compute node from a chassis for instructions).
  3. Carefully lay the compute node on a flat, static-protective surface with the cover side down, orienting the compute node with the bezel pointing toward you.

To remove the front handles, complete the following steps.
handle removal

  1. Locate the screws that attache the handles to the compute node.
  2. Using a T8 Torx screwdriver, remove the screw from each front handle and save the screw in a safe place. Use the same screws when you install the front handles.
If you are instructed to return the front handles, follow all packaging instructions, and use any packaging materials for shipping that are supplied to you.