Skip to main content

Configuration commands

This topic provides an alphabetic list of configuration CLI commands.

The configuration commands are as follows:

  • accseccfg command
    Use this command to display and configure account security settings.
  • alertcfg command
    Use this command to display and configure the IMM2 global remote alert parameters.
  • asu command
    This command is used to set UEFI settings.
  • autopromo command
    This command is used to display and configure settings for the automated promotion of backup firmware.
  • backup command
    Use this command to create a backup file containing the current system security settings.
  • cryptomode command
    Use this command to display and configure the compliance mode with the exceptions for encryption.
  • dhcpinfo command
    Use this command to view the DHCP server-assigned IP configuration for eth0.
  • dns command
    Use this command to view and set the DNS configuration of the IMM2.
  • ethtousb command
    Use the ethtousb command to display and configure Ethernet to Ethernet-over-USB port mapping.
  • gprofile command
    Use this command to display and configure group profiles for the IMM2.
  • ifconfig command
    Use this command to configure the Ethernet interface.
  • keycfg command
    Use this command to display, add, or delete activation keys.
  • ldap command
    Use this command to display and configure the LDAP protocol configuration parameters.
  • ntp command
    Use this command to display and configure the Network Time Protocol (NTP).
  • passwordcfg command
    Use this command to display and configure the password parameters.
  • ports command
    Use this command to display and configure IMM2 ports.
  • portcfg command
    Use this command to configure the IMM2 for the serial redirection feature.
  • portcontrol command
    Use this command to turn a network service port on or off.
  • restore command
    Use this command to restore system settings from a backup file.
  • restoredefaults command
    Use this command to restore all IMM2 settings to the factory default.
  • scale command
    Use this command to set and display the partition control and configuration settings for multiple nodes (servers) in a scalable complex.
  • sdraid command
    Use this command to configure and control the optional SD Media RAID Adapter for System x.
  • set command
    Use this command to change some IMM2 settings.
  • smtp command
    Use this command to display and configure settings for the SMTP interface.
  • snmp command
    Use this command to display and configure SNMP interface information.
  • snmpalerts command
    Use this command to manage alerts sent via the SNMP.
  • srcfg command
    Use this command to indicate the key sequence to enter the CLI from the serial redirection mode.
  • sshcfg command
    Use this command to display and configure SSH parameters.
  • ssl command
    Use this command to display and configure the SSL parameters.
  • sslcfg command
    Use this command to display and configure the SSL for the IMM2 and manage certificates.
  • storage command
    Use this command to display and configure (if supported by the platform) information about the server's storage devices that are managed by the IMM2.
  • storekeycfg command
    Use this command to configure the hostname or IP address and network port for a SKLM server.
  • telnetcfg command
    Use this command to display and configure Telnet settings.
  • tls command
    Use this command to set the minimum TLS level.
  • thermal command
    Use this command to display and configure the thermal mode policy of the host system.
  • timeouts command
    Use this command to display or change the timeout values.
  • usbeth command
    Use this command to enable or disable the in-band LAN over USB interface.
  • users command
    Use this command to access all user accounts and their authority levels.