autopromo command

This command is used to display and configure settings for the automated promotion of backup firmware.

Use the autopromo command to display and configure the setting for the automated promotion of IMM2 backup firmware. If enabled, the Automated Promotion feature automatically copies the IMM2 firmware from the primary area into the backup area once the firmware in the primary area has run successfully for a period of time.

Running the autopromo command with no options displays automated promotion parameters and status information. The following table shows the arguments for the option.

Table 1. autopromo command.

The following table is a single-row three column table consisting of the option, option description, and associated values for the option.

Option	Description	Values
-en	Enable or disable the automated promotion of the IMM2 backup firmware.	enabled, disabled

Syntax:

autopromo [<em className="ph i">options</em>]
  options: 
   -en <em className="ph i">enabled/disabled</em>

Example:

system>autopromo -en enabled
ok
system>autopromo
-en: enabled
Status:  Not Synced
Primary bank version: 4.00
Backup bank version:  2.60