ssl command
Use this command to display and configure the SSL parameters.
To enable an SSL client, a client certificate must be installed. Running the ssl command with no options displays SSL parameters. The following table shows the arguments for the options.
| Option | Description | Values |
|---|---|---|
| -ce | Enables or disables an SSL client | on, off |
| -se | Enables or disables an SSL server | on, off |
| -cime | Enables or disables CIM over HTTPS on the SSL server | on, off |
Syntax:
portcfg [<em className="ph i">options</em>]
options:
-ce <em className="ph i">state</em>
-se <em className="ph i">state</em>
-cime <em className="ph i">state</em>
Parameters: The following parameters are presented in the option status display for the ssl command and are output only from the CLI:
- Server secure transport enable
- This status display is read-only and cannot be set directly.
- Server Web/CMD key status
- This status display is read-only and cannot be set directly. Possible command line output values are as follows:
- Private Key and Cert/CSR not available
- Private Key and CA-signed cert installed
- Private Key and Auto-gen self-signed cert installed
- Private Key and Self-signed cert installed
- Private Key stored, CSR available for download
- SSL server CSR key status
- This status display is read-only and cannot be set directly. Possible command line output values are as follows:
- Private Key and Cert/CSR not available
- Private Key and CA-signed cert installed
- Private Key and Auto-gen self-signed cert installed
- Private Key and Self-signed cert installed
- Private Key stored, CSR available for download
- SSL client LDAP key status
- This status display is read-only and cannot be set directly. Possible command line output values are as follows:
- Private Key and Cert/CSR not available
- Private Key and CA-signed cert installed
- Private Key and Auto-gen self-signed cert installed
- Private Key and Self-signed cert installed
- Private Key stored, CSR available for download
- SSL client CSR key status
- This status display is read-only and cannot be set directly. Possible command line output values are as follows:
- Private Key and Cert/CSR not available
- Private Key and CA-signed cert installed
- Private Key and Auto-gen self-signed cert installed
- Private Key and Self-signed cert installed
- Private Key stored, CSR available for download
Give feedback