Skip to main content

Drive fast format failed

A failure occurred while performing a fast format on a new drive.

Important
You can remove the drive while the storage array is receiving I/O.
CAUTION
Electrostatic discharge can damage sensitive components

Always use proper anti-static protection when handling components. Touching components without using a grounding wrist strap may damage the equipment.

Recovery Steps​

  1. Is this the first time this problem is being reported?

    • If yes, go to step 2.

    • If no, contact your Technical Support Engineer.

  2. Remove the drive shown in the Details area.

  3. Wait at least 30 seconds, and then re-insert the drive. Its fault indicator light may be lit for a short time (one minute or less).

  4. Select Recheck to ensure the problem has been resolved.