FQXSFPU0030N : A firmware fault has been detected in the UEFI image.
A firmware fault has been detected in the UEFI image.
Complete the following steps:
- Check Lenovo Support site for an applicable service bulletin or firmware update that applies to this error.
- Reflash UEFI image.
- Undo recent system changes (settings or devices added). Verify that the system boots. Then, re-install options one at a time to locate the problem.
- If problem persists, save customer's UEFI configurations, then remove and re-install CMOS battery for 30 seconds to clear CMOS contents. If it boots successfully, then restore system settings.
- If the problem persists, collect Service Data logs and contact Lenovo Support.