Skip to main content

Remove the OCP module

Follow instructions in this section to remove to remove the OCP module.

About this task

To avoid potential danger, make sure to read and follow the safety information.

Attention

Read Installation Guidelines and Safety inspection checklist to make sure that you work safely.

Procedure

  1. Make preparations for this task.
    1. Power off the node (see Power off the node).
  2. Remove the OCP module.
    1. Loosen the thumbscrew that secures the OCP module. Use a screwdriver if necessary.
    2. Grasp the handle and pull out the OCP module.
      Figure 1. Removal of the rear OCP module
      Removing rear OCP module

After you finish

  1. Install a replacement unit or filler (see Install an OCP module).
  2. If you are instructed to return the component or optional device, follow all packaging instructions, and use any packaging materials for shipping that are supplied to you.