Skip to main content

Remove a power adapter (Desktop mount)

Follow instructions in this section to remove power adapters.

About this task

S002
disconnect all power
CAUTION
The power-control button on the device and the power switch on the power supply do not turn off the electrical current supplied to the device. The device also might have more than one power cord. To remove all electrical current from the device, ensure that all power cords are disconnected from the power source.
S035
shock hazard
CAUTION

Never remove the cover on a power supply or any part that has this label attached. Hazardous voltage, current, and energy levels are present inside any component that has this label attached. There are no serviceable parts inside these components. If you suspect a problem with one of these parts, contact a service technician.

Attention

Procedure

Disconnect the power adapter from the server.
  1. Use a flat-blade screwdriver to loosen the screw that lock the power cable.
  2. Disengage the power cable from the server to remove the power adapter.
    Figure 1. Disconnecting the power adapter

After you finish

  • Install a replacement unit. See Install a power adapter (Desktop mount).

  • If you are instructed to return the component or optional device, follow all packaging instructions, and use any packaging materials for shipping that are supplied to you.