Skip to main content

Install the serial port module

See this topic to learn how to install the serial port module.

About this task

This module can only be installed to PCIe Slot 6 in Riser 1.


  1. Slide the module into the riser.
    Figure 1. Installing the serial port module to the riser

  2. Secure the module to the riser with a screw, and close the retainer.
    Figure 2. Securing the serial port module

  3. Connect the serial port cable to the system board.
    Figure 3. Connecting the serial port cable

  4. Proceed to install Riser 1 (see Install the PCIe adapters and riser assemblies).

After this task is completed

Proceed to complete the parts replacement (see Complete the parts replacement).

Watch the procedure on YouTube