Install the air baffle
Use this information to install the air baffle.
S033
![240VA shock hazard](240VA_shock_hazard-126.png)
![240VA shock hazard](240VA_shock_hazard-126.png)
CAUTION
Hazardous energy present. Voltages with hazardous energy might cause heating when shorted with metal, which might result in spattered metal, burns, or both.
S017
![moving parts](moving_fan_blades-126.png)
![moving parts](moving_fan_blades-126.png)
CAUTION
Hazardous moving fan blades nearby. Keep fingers and other body parts away.
To install the air baffle, complete the following steps:
Watch the procedure
A video of this procedure is available at YouTube.
Figure 1. Air baffle installation
![Install the air baffle.](sr530_isairbaffle-450.png)
![Install the air baffle.](sr530_isairbaffle-450.png)
- Align the tabs on both sides of the air baffle with the corresponding slots on both sides of the chassis.
- Lower the air baffle into the server and press the air baffle down until it is securely seated.
After installing the air baffle, if there is a RAID super capacitor module installed, connect it to the RAID adapter with the extension cable that comes with the RAID super capacitor module.
Give documentation feedback