Server models with eight 3.5-inch simple-swap drives
Use this section to understand the cable routing for server models with eight 3.5-inch simple-swap drives.
Figure 1. Cable routing for server models with eight 3.5-inch simple-swap drives
The simple-swap drive backplate comes with two power cables and two signal cables. Connect the cables to the system board.| From | To |
|---|---|
| 1 Mini-SAS cable labeled with 0 | SATA 0-3 connector on the system board |
| 2 Mini-SAS cable labeled with 1 | SATA 4-7 connector on the system board |
| 3 Power cable labeled with 0 | Backplane power connector 1 on the system board |
| 4 Power cable labeled with 1 | Backplane power connector 2 on the system board |
Give documentation feedback