Skip to main content

Install the air baffle

Use this information to install the air baffle.

Read the installation GuidelinesPower off the server for this taskATTENTION: Static Sensitive Device Ground package before opening
S033
240VA shock hazard
CAUTION

Hazardous energy present. Voltages with hazardous energy might cause heating when shorted with metal, which might result in spattered metal, burns, or both.

S017
moving parts
CAUTION
Hazardous moving fan blades nearby. Keep fingers and other body parts away.
Before installing the air baffle:

  1. Ensure that no tools or loose screws are left inside your server.

  2. Ensure that all components have been reassembled correctly.

  3. Ensure that all cables inside the server have been properly routed and they will not interfere with installing the air baffle.

To install the air baffle, complete the following steps:

Watch the procedure

A video of this procedure is available at YouTube.

Note
Ensure that the retaining clips on each end of the DIMM connectors are closed.

  1. Align the air baffle tabs with the slots on both sides of the chassis. Then, lower the air baffle into the server and press the air baffle down until it is securely seated.
    Figure 1. Air baffle installation
    Air baffle installation
  2. Install any RAID super capacitor module that you have removed.

After installing the air baffle, install any RAID super capacitor modules that you removed.