Install the RAID super capacitor module

Use this information to install the RAID super capacitor module.

Read the installation Guidelines

Power off the server for this task

ATTENTION: Static Sensitive Device Ground package before opening

Before installing a RAID super capacitor module:

1. Touch the static-protective package that contains the new RAID super capacitor module to any unpainted surface on the outside of the server. Then, take the new RAID super capacitor module out of the package and place it on a static-protective surface.

2. Locate the holder for the RAID super capacitor module on the air baffle and note the orientation of the RAID super capacitor module.

To install a RAID super capacitor module, complete the following steps:

Watch the procedure

A video of this procedure is available at YouTube.

1. Gently press and hold the tab on the air baffle as shown, and insert the RAID super capacitor module into the holder on the air baffle.
   Figure 1. RAID super capacitor module installation
   
   
2. Connect the RAID super capacitor module to a RAID adapter with the extension cable that comes with the RAID super capacitor module.
   Figure 2. Connecting the RAID super capacitor module to the RAID adapter