FQXSPIO0024M : [BackplaneName] has invalid cabling configuration.
[BackplaneName] has invalid cabling configuration.
This message is for the use case when invalid cabling configuration is detected on a backplane.
Severity
Error
Alert Category
Critical - Other
Serviceable
No
SNMP Trap ID
50
Automatically Notify Support
No
User Action
Complete the following steps until the problem is solved:
- Power off the server, disconnect the AC power cable and reconnect the signal cable or power cable of the affected backplane.
- Refer to the E3.S drive backplane connection label attached on the chassis to check the cable connection.
- If the problem persists, update the Drive Backplane and Boot Kit PSOC Firmware to the latest version.
- If the problem persists, upgrade XCC, FPGA, and UEFI to the latest versions.
- If the problem persists, collect service data logs.
- Contact Lenovo Support.
Entregar comentarios