FQXSPIO0039G : Signal cable of [DeviceName] is misconnected to [WrongConnectorName]. Should connect to [MCIOorMXIOConnectName].
Signal cable of [DeviceName] is misconnected to [WrongConnectorName]. Should connect to [MCIOorMXIOConnectName].
This message is for the use case when an implementation has detected that a signal cable of device has been misconnected.
Severity
Warning
Alert Category
Warning - Other
Serviceable
Yes
SNMP Trap ID
60
Automatically Notify Support
No
User Action
Complete the following steps until the problem is solved:
- Power off the server, disconnect the AC power cable and reconnect the signal cable or power cable of the affected riser card.
- Refer to the reported message and Cable Routing Guide to connect the signal cable or power cable to the correct connector.
- If the problem persists, upgrade XCC, FPGA, and UEFI to the latest versions.
- If the problem persists, collect service data logs.
- Contact Lenovo Support.
Entregar comentarios