Skip to main content

Remove the air baffle

Use this information to remove the air baffle.

About this task

Depending on the model, your server might not have an air baffle installed. The air baffle you want to remove might be different from the following illustrations, but the removal method is the same.

240VA shock hazard

Hazardous energy present. Voltages with hazardous energy might cause heating when shorted with metal, which might result in spattered metal, burns, or both.

moving parts
Hazardous moving fan blades nearby. Keep fingers and other body parts away.
  • Read Installation guidelines to ensure that you work safely.

  • Power off the server and disconnect all power cords for this task.

A video for this task is available at YouTube


  1. If there is a RAID super capacitor module installed on the bottom of the air baffle, disconnect the RAID super capacitor module cable first.
  2. Grasp the air baffle and carefully lift it out of the server.
    Figure 1. Air baffle removal
    Air baffle removal

    For proper cooling and airflow, install the air baffle before you power on the server. Operating the server with the air baffle removed might damage server components.

After you finish

Install any options that you have purchased.