Skip to main content

Install the full-height cable wall brackets

Use this information to install the full-height cable wall brackets.

About this task

Attention

  • Read Installation Guidelines to ensure that you work safely.

  • Prevent exposure to static electricity, which might lead to system halt and loss of data, by keeping static-sensitive components in their static-protective packages until installation, and handling these devices with an electrostatic-discharge wrist strap or other grounding system.

Procedure

Figure 1. Cable wall brackets installation
Cable wall brackets installation

  1. Align the cable wall brackets with the two holes on the system board. Install the brackets onto the system board.
  2. Install the two screws to secure the brackets.

After you finish

  1. Install any parts you have removed. See Hardware replacement procedures.

  2. Connect any cables. See Internal cable routing.

  3. Complete the parts replacement. See Complete the parts replacement.