Remove the OCP enablement kit for vSphere DSE
Use this information to remove the OCP enablement kit for vSphere DSE.
About this task
CAUTION
Power off the server and disconnect all power cords from their power sources before performing this procedure.
Attention
Read Installation Guidelines to ensure that you work safely.
Prevent exposure to static electricity, which might lead to system halt and loss of data, by keeping static-sensitive components in their static-protective packages until installation, and handling these devices with an electrostatic-discharge wrist strap or other grounding system.
Procedure
Remove the OCP enablement kit for vSphere DSE.
Figure 1. OCP enablement kit for vSphere DSE removal
- Loosen the screw that secures the OCP enablement kit for vSphere DSE.
- Press and hold the blue latch.
- Push the OCP enablement kit for vSphere DSE by the latch out from the chassis.
After you finish
Install a replacement unit or a filler.
If you are instructed to return the defective component, follow all packaging instructions and use any packaging materials that are provided.
Give documentation feedback