Remove the OCP 3.0 Ethernet adapter
Use this information to remove the OCP 3.0 Ethernet adapter.
About this task
CAUTION
Power off the server and disconnect all power cords from their power sources before performing this procedure.
Attention
Read Installation Guidelines to ensure that you work safely.
Prevent exposure to static electricity, which might lead to system halt and loss of data, by keeping static-sensitive components in their static-protective packages until installation, and handling these devices with an electrostatic-discharge wrist strap or other grounding system.
Procedure
Remove the OCP 3.0 Ethernet adapter.
Figure 1. OCP 3.0 Ethernet adapter removal
- Loosen the thumbscrew that secures the card.
- Pull out the OCP 3.0 Ethernet adapter.
After you finish
Install a new OCP 3.0 Ethernet adapter or a card filler.
If you are instructed to return the defective component, follow all packaging instructions and use any packaging materials that are provided.
Demo video
Give documentation feedback