Skip to main content

RAID flash power module

Use this section to understand the cable routing for RAID flash power modules (also called supercap).

The location of RAID flash power modules varies by the server hardware configurations.
Figure 1. On the chassis


Figure 2. On standard air baffle


Figure 3. On GPU air baffle


Figure 4. On the 2.5-inch middle drive cage


Note
The supercap holder on the chassis is not supported if the 12 x 3.5-inch drive backplane with expander is installed.
An extension cable is provided for each RAID flash power module for cable connection. Connect the cable from the RAID flash power module to the corresponding RAID adapter as shown.

FromTo
RAID flash power moduleSupercap connector on the RAID adapter