Front + middle + rear backplanes: 12 x 3.5-inch SAS/SATA expander + 4 x 3.5-inch SAS/SATA + 4 x 3.5-inch SAS/SATA
This section provides cable routing information for configuration (one 12 x 3.5-inch SAS/SATA expander front drive backplane, one 4 x 3.5-inch SAS/SATA middle drive backplane, and one 4 x 3.5-inch SAS/SATA rear drive backplane) with one 16i RAID/HBA adapter.
16i RAID/HBA adapter
Connections between connectors: 1 ↔ 1, 2 ↔ 2, 3 ↔ 3, ... n ↔ n
Figure 1. Signal cable routing
From | To |
|---|---|
| 1 Front backplane: SAS 0 | 1 16i adapter:
|
| 2 Middle backplane: SAS | 2 16i adapter:
|
| 3 Rear backplane: SAS | 3 Front backplane: SAS 1 |
Give documentation feedback