Front + rear backplanes: 12 x 3.5-inch SAS/SATA expander + 4 x 3.5-inch SAS/SATA
This section provides cable routing information for configuration (one 12 x 3.5-inch SAS/SATA expander front drive backplane and one 4 x 3.5-inch SAS/SATA rear drive backplane) with one 8i RAID/HBA adapter.
8i RAID/HBA adapter
Connections between connectors: 1 ↔ 1, 2 ↔ 2, 3 ↔ 3, ... n ↔ n
Figure 1. Signal cable routing
From | To |
---|---|
1 Front backplane: SAS 0 | 1 8i adapter:
|
2 Front backplane: SAS 1 | 2 Rear backplane: SAS |
Give documentation feedback