Skip to main content

One 8 x AnyBay backplane

This section provides cable routing information for the server model with one 8 x 2.5-inch AnyBay front backplane.

To connect power cables for the front backplane(s), refer to Backplanes: server models with 2.5-inch front drive bays.

To connect signal cables for the front backplane(s), refer to the following cable routing scenarios depending on your server configuration.

  • 8 x AnyBay
    This topic provides cable routing information for the 8 x 2.5-inch AnyBay configuration.

  • 6 x SAS/SATA + 2 x AnyBay
    This topic provides cable routing information for the 6 x 2.5-inch SAS/SATA + 2 x 2.5-inch AnyBay configuration.