UEFI events
UEFI error messages can be generated when the server starts up (POST) or while the server is running. UEFI error messages are logged in the Lenovo XClarity Controller event log in the server.
For each event code, the following fields are displayed:
- Event identifier
- An identifier that uniquely identifies an event.
- Event description
- The logged message string that appears for an event.
- Explanation
- Provides additional information to explain why the event occurred.
- Severity
- An indication of the level of concern for the condition. The severity is abbreviated in the event log to the first character. The following severities can be displayed:
Informational. The event was recorded for audit purposes, usually a user action or a change of states that is normal behavior.
Warning. The event is not as severe as an error, but if possible, the condition should be corrected before it becomes an error. It might also be a condition that requires additional monitoring or maintenance.
Error. The event is a failure or critical condition that impairs service or an expected function.
- User Action
- Indicates what actions you should perform to solve the event. Perform the steps listed in this section in the order shown until the problem is solved. If you cannot solve the problem after performing all steps, contact Lenovo Support.
- UEFI events organized by severity
The following table lists all UEFI events, organized by severity (Information, Error, and Warning). - FQXSFDD0001G : DRIVER HEALTH PROTOCOL: Missing Configuration. Requires Change Settings From F1.
DRIVER HEALTH PROTOCOL: Missing Configuration. Requires Change Settings From F1. - FQXSFDD0002M : DRIVER HEALTH PROTOCOL: Reports 'Failed' Status Controller.
DRIVER HEALTH PROTOCOL: Reports 'Failed' Status Controller. - FQXSFDD0003I : DRIVER HEALTH PROTOCOL: Reports 'Reboot' Required Controller.
DRIVER HEALTH PROTOCOL: Reports 'Reboot' Required Controller. - FQXSFDD0004M : DRIVER HEALTH PROTOCOL: Reports 'System Shutdown' Required Controller.
DRIVER HEALTH PROTOCOL: Reports 'System Shutdown' Required Controller. - FQXSFDD0005M : DRIVER HEALTH PROTOCOL: Disconnect Controller Failed. Requires 'Reboot'.
DRIVER HEALTH PROTOCOL: Disconnect Controller Failed. Requires 'Reboot'. - FQXSFDD0006M : DRIVER HEALTH PROTOCOL: Reports Invalid Health Status Driver.
DRIVER HEALTH PROTOCOL: Reports Invalid Health Status Driver. - FQXSFDD0007G : Security Key Lifecycle Manager (SKLM) IPMI Error.
Security Key Lifecycle Manager (SKLM) IPMI Error. - FQXSFDD0012I : SATA Hard Drive Error: [arg1] was recovered.
SATA Hard Drive Error: [arg1] was recovered. - FQXSFDD0012K : SATA Hard Drive Error: [arg1].
SATA Hard Drive Error: [arg1]. - FQXSFIO0010M : An Uncorrectable PCIe Error has Occurred at Bus [arg1] Device [arg2] Function [arg3]. The Vendor ID for the device is [arg4] and the Device ID is [arg5]. The physical [arg6] number is [arg7].
An Uncorrectable PCIe Error has Occurred at Bus [arg1] Device [arg2] Function [arg3]. The Vendor ID for the device is [arg4] and the Device ID is [arg5]. The physical [arg6] number is [arg7]. - FQXSFIO0011M : A PCIe parity error has occurred on Bus [arg1] Device [arg2] Function [arg3]. The Vendor ID for the device is [arg4] and the Device ID is [arg5]. The Physical slot number is [arg6].
A PCIe parity error has occurred on Bus [arg1] Device [arg2] Function [arg3]. The Vendor ID for the device is [arg4] and the Device ID is [arg5]. The Physical slot number is [arg6]. - FQXSFIO0012M : A PCIe system error has occurred on Bus [arg1] Device [arg2] Function [arg3]. The Vendor ID for the device is [arg4] and the Device ID is [arg5]. The Physical slot number is [arg6].
A PCIe system error has occurred on Bus [arg1] Device [arg2] Function [arg3]. The Vendor ID for the device is [arg4] and the Device ID is [arg5]. The Physical slot number is [arg6]. - FQXSFIO0013I : The device found at Bus [arg1] Device [arg2] Function [arg3] could not be configured due to resource constraints. The Vendor ID for the device is [arg4] and the Device ID is [arg5]. The physical slot number is [arg6].
The device found at Bus [arg1] Device [arg2] Function [arg3] could not be configured due to resource constraints. The Vendor ID for the device is [arg4] and the Device ID is [arg5]. The physical slot number is [arg6]. - FQXSFIO0014J : A bad option ROM checksum was detected for the device found at Bus [arg1] Device [arg2] Function [arg3]. The Vendor ID for the device is [arg4] and the Device ID is [arg5]. The physical slot number is [arg6].
A bad option ROM checksum was detected for the device found at Bus [arg1] Device [arg2] Function [arg3]. The Vendor ID for the device is [arg4] and the Device ID is [arg5]. The physical slot number is [arg6]. - FQXSFIO0017M : IFM: Error communicating with the XCC - IFM may not be deployed correctly.
IFM: Error communicating with the XCC - IFM may not be deployed correctly. - FQXSFIO0019J : PCIe Resource Conflict.
PCIe Resource Conflict. - FQXSFIO0021J : PCIe Error Recovery has occurred in physical [arg1] number [arg2]. The [arg3] may not operate correctly.
PCIe Error Recovery has occurred in physical [arg1] number [arg2]. The [arg3] may not operate correctly. - FQXSFIO0022J : PCIe Link Width has degraded from [arg1] to [arg2] in physical [arg3] number [arg4].
PCIe Link Width has degraded from [arg1] to [arg2] in physical [arg3] number [arg4]. - FQXSFIO0023J : PCIe Link Speed has degraded from [arg1] to [arg2] in physical [arg3] number [arg4].
PCIe Link Speed has degraded from [arg1] to [arg2] in physical [arg3] number [arg4]. - FQXSFIO0024J : PCIe Link Training Failure has occurred in physical [arg1] number [arg2].
PCIe Link Training Failure has occurred in physical [arg1] number [arg2]. - FQXSFIO0027I : The Bus:[arg1] Device:[arg2] Fun:[arg3] is attempted to boot PXE.
The Bus:[arg1] Device:[arg2] Fun:[arg3] is attempted to boot PXE. - FQXSFIO0029G : Correctable CPU link error has been detected on processor [arg1].
Correctable CPU link error has been detected on processor [arg1]. - FQXSFIO0030M : Uncorrectable CPU link error has been detected on processor [arg1].
Uncorrectable CPU link error has been detected on processor [arg1]. - FQXSFIO0042N : An uncorrectable USB error (Type [arg1]) is detected on processor [arg2] USB controller [arg3].
An uncorrectable USB error (Type [arg1]) is detected on processor [arg2] USB controller [arg3]. - FQXSFMA0001I : DIMM [arg1] Disable has been recovered. [arg2]
DIMM [arg1] Disable has been recovered. [arg2] - FQXSFMA0001M : DIMM [arg1] has been disabled due to an error detected during POST. [arg2]
DIMM [arg1] has been disabled due to an error detected during POST. [arg2] - FQXSFMA0002I : The uncorrectable memory error state has been cleared.
The uncorrectable memory error state has been cleared. - FQXSFMA0002M : An uncorrectable memory error has been detected on DIMM [arg1] at address [arg2]. [arg3]
An uncorrectable memory error has been detected on DIMM [arg1] at address [arg2]. [arg3] - FQXSFMA0006I : [arg1] DIMM [arg2] has been detected, the DIMM serial number is [arg3].
[arg1] DIMM [arg2] has been detected, the DIMM serial number is [arg3]. - FQXSFMA0007I : [arg1] DIMM number [arg2] has been replaced. [arg3]
[arg1] DIMM number [arg2] has been replaced. [arg3] - FQXSFMA0008I : DIMM [arg1] POST memory test failure has been recovered. [arg2]
DIMM [arg1] POST memory test failure has been recovered. [arg2] - FQXSFMA0008M : DIMM [arg1] has failed the POST memory test. [arg2]
DIMM [arg1] has failed the POST memory test. [arg2] - FQXSFMA0012L : The [arg1] PFA Threshold limit has been exceeded on DIMM [arg2] at address [arg3]. [arg4]
The [arg1] PFA Threshold limit has been exceeded on DIMM [arg2] at address [arg3]. [arg4] - FQXSFMA0026G : Multi-bit CE occurred on DIMM [arg1], need to restart the system for DIMM Self-healing to attempt post package repair (PPR).
Multi-bit CE occurred on DIMM [arg1], need to restart the system for DIMM Self-healing to attempt post package repair (PPR). - FQXSFMA0026I : DIMM [arg1] Self-healing, attempt post package repair (PPR) succeeded. [arg2]
DIMM [arg1] Self-healing, attempt post package repair (PPR) succeeded. [arg2] - FQXSFMA0027G : Multi-bit CE occurred on DIMM [arg1] different rows.[arg2]
Multi-bit CE occurred on DIMM [arg1] different rows.[arg2] - FQXSFMA0027I : Invalid memory configuration (unsupported DIMM Population) recovered.
Invalid memory configuration (unsupported DIMM Population) recovered. - FQXSFMA0027K : Invalid memory configuration (Unsupported DIMM Population) detected. Please verify memory configuration is valid.
Invalid memory configuration (Unsupported DIMM Population) detected. Please verify memory configuration is valid. - FQXSFMA0027M : DIMM [arg1] Self-healing, attempt post package repair (PPR) failed at Rank [arg2] Sub Rank [arg3] Bank [arg4] Row [arg5] on Device [arg6]. [arg7]
DIMM [arg1] Self-healing, attempt post package repair (PPR) failed at Rank [arg2] Sub Rank [arg3] Bank [arg4] Row [arg5] on Device [arg6]. [arg7] - FQXSFMA0028M : DIMM [arg1] Self-healing, attempt post package repair (PPR) exceeded DIMM level threshold [arg2] at Rank [arg3] Sub Rank [arg4] Bank [arg5] Row [arg6] on Device [arg7]. [arg8]
DIMM [arg1] Self-healing, attempt post package repair (PPR) exceeded DIMM level threshold [arg2] at Rank [arg3] Sub Rank [arg4] Bank [arg5] Row [arg6] on Device [arg7]. [arg8] - FQXSFMA0029I : The PFA of DIMM [arg1] has been deasserted after applying PPR for this DIMM. [arg2]
The PFA of DIMM [arg1] has been deasserted after applying PPR for this DIMM. [arg2] - FQXSFMA0030I : A correctable memory error has been detected on DIMM [arg1]. [arg2]
A correctable memory error has been detected on DIMM [arg1]. [arg2] - FQXSFMA0047M : SPD CRC checking failed on DIMM [arg1]. [arg2]
SPD CRC checking failed on DIMM [arg1]. [arg2] - FQXSFMA0048M : DIMM [arg1] disabled due to PMIC failure during POST, DIMM identifier is [arg2].
DIMM [arg1] disabled due to PMIC failure during POST, DIMM identifier is [arg2]. - FQXSFMA0050G : DRAM PFA threshold limit exceeded on DIMM [arg1] sub-channel [arg2] Rank [arg3] DRAM [arg4], DIMM identifier is [arg5].
DRAM PFA threshold limit exceeded on DIMM [arg1] sub-channel [arg2] Rank [arg3] DRAM [arg4], DIMM identifier is [arg5]. - FQXSFMA0056I : Uncorrected memory error occurred on DIMM [arg1] has been deasserted after performing post package repair. DIMM identifier is [arg2].
Uncorrected memory error occurred on DIMM [arg1] has been deasserted after performing post package repair. DIMM identifier is [arg2]. - FQXSFMA0057G : Page Retire PFA Threshold limit exceeded on DIMM [arg1] at address [arg2].[arg3] [arg4]
Page Retire PFA Threshold limit exceeded on DIMM [arg1] at address [arg2].[arg3] [arg4] - FQXSFMA0065I : Multi-bit CE of DIMM [arg1] has been deasserted after performing post package repair. DIMM identifier is [arg2].
Multi-bit CE of DIMM [arg1] has been deasserted after performing post package repair. DIMM identifier is [arg2]. - FQXSFMA0067G : Errors per row counter threshold limit exceeded on DIMM [arg1] sub-channel [arg2] Rank [arg3] DRAM [arg4], need to restart the system for DIMM Self-healing to attempt post package repair (PPR), DIMM identifier is [arg5].
Errors per row counter threshold limit exceeded on DIMM [arg1] sub-channel [arg2] Rank [arg3] DRAM [arg4], need to restart the system for DIMM Self-healing to attempt post package repair (PPR), DIMM identifier is [arg5]. - FQXSFMA0067I : Errors per row counter threshold limit exceeded on DIMM [arg1] has been deasserted after performing post package repair. DIMM identifier is [arg2].
Errors per row counter threshold limit exceeded on DIMM [arg1] has been deasserted after performing post package repair. DIMM identifier is [arg2]. - FQXSFMA0076M : DIMM [arg1] is not supported, DIMM identifier is [arg2].
DIMM [arg1] is not supported, DIMM identifier is [arg2]. - FQXSFPU0019N : An uncorrectable error has been detected on processor [arg1].
An uncorrectable error has been detected on processor [arg1]. - FQXSFPU0021G : Hardware physical presence is in asserted state.
Hardware physical presence is in asserted state. - FQXSFPU0021I : The TPM physical presence state has been cleared.
The TPM physical presence state has been cleared. - FQXSFPU0022G : The TPM configuration is not locked.
The TPM configuration is not locked. - FQXSFPU0023G : Secure Boot Image Verification Failure Warning.
Secure Boot Image Verification Failure Warning. - FQXSFPU0023I : Secure Boot Image Verification Failure has been cleared as no failure in this round boot.
Secure Boot Image Verification Failure has been cleared as no failure in this round boot. - FQXSFPU0025I : The default system settings have been restored.
The default system settings have been restored. - FQXSFPU0030N : A firmware fault has been detected in the UEFI image.
A firmware fault has been detected in the UEFI image. - FQXSFPU0031N : The number of POST attempts has reached the value configured in F1 setup. The system has booted with default UEFI settings. User specified settings have been preserved and will be used on subsequent boots unless modified before rebooting.
The number of POST attempts has reached the value configured in F1 setup. The system has booted with default UEFI settings. User specified settings have been preserved and will be used on subsequent boots unless modified before rebooting. - FQXSFPU0034L : The TPM could not be initialized properly.
The TPM could not be initialized properly. - FQXSFPU0038I : A correctable error (Type [arg1]) has been detected by processor [arg2].
A correctable error (Type [arg1]) has been detected by processor [arg2]. - FQXSFPU0063N : CPU [arg1] cores [arg2] disabled.
CPU [arg1] cores [arg2] disabled. - FQXSFPU4033F : TPM Firmware recovery is in progress. Please DO NOT power off or reset system.
TPM Firmware recovery is in progress. Please DO NOT power off or reset system. - FQXSFPU4034I : TPM Firmware recovery is finished, rebooting system to take effect.
TPM Firmware recovery is finished, rebooting system to take effect. - FQXSFPU4035M : TPM Firmware recovery failed. TPM chip may be damaged.
TPM Firmware recovery failed. TPM chip may be damaged. - FQXSFPU4038I : TPM Firmware recovery successful.
TPM Firmware recovery successful. - FQXSFPU4040M : TPM selftest has failed.
TPM selftest has failed. - FQXSFPU4041I : TPM Firmware update is in progress. Please DO NOT power off or reset system.
TPM Firmware update is in progress. Please DO NOT power off or reset system. - FQXSFPU4042I : TPM Firmware update is finished, rebooting system to take effect.
TPM Firmware update is finished, rebooting system to take effect. - FQXSFPU4043G : TPM Firmware update aborted. System is rebooting...
TPM Firmware update aborted. System is rebooting... - FQXSFPU4044I : The current TPM firmware version could not support TPM version toggling.
The current TPM firmware version could not support TPM version toggling. - FQXSFPU4045G : Physical Presence is not asserted, abort TPM Firmware upgrade.
Physical Presence is not asserted, abort TPM Firmware upgrade. - FQXSFPU4046I : TPM Firmware will be updated from TPM1.2 to TPM2.0.
TPM Firmware will be updated from TPM1.2 to TPM2.0. - FQXSFPU4047I : TPM Firmware will be updated from TPM2.0 to TPM1.2.
TPM Firmware will be updated from TPM2.0 to TPM1.2. - FQXSFPU4049I : TPM Firmware update successful.
TPM Firmware update successful. - FQXSFPU4050G : Failed to update TPM Firmware.
Failed to update TPM Firmware. - FQXSFPU4051G : Undefined TPM_POLICY found
Undefined TPM_POLICY found - FQXSFPU4052G : TPM_POLICY is not locked
TPM_POLICY is not locked - FQXSFPU4053G : System TPM_POLICY does not match the planar.
System TPM_POLICY does not match the planar. - FQXSFPU4054G : TPM card logical binding has failed.
TPM card logical binding has failed. - FQXSFPU4056M : TPM card is changed, need install back the original TPM card which shipped with the system.
TPM card is changed, need install back the original TPM card which shipped with the system. - FQXSFPU4059I : User requested to skip freezing lock of AHCI-attached SATA drives. System UEFI accepted the request and will execute prior to OS boot.
User requested to skip freezing lock of AHCI-attached SATA drives. System UEFI accepted the request and will execute prior to OS boot. - FQXSFPU4060I : Skipped freezing lock of AHCI-attached SATA drives.
Skipped freezing lock of AHCI-attached SATA drives. - FQXSFPU4061I : Restored default locking behavior of AHCI-attached SATA drives.
Restored default locking behavior of AHCI-attached SATA drives. - FQXSFPU4070I : Platform secure boot fuse is enabled.
Platform secure boot fuse is enabled. - FQXSFPU4071I : Platform secure boot fuse is disabled.
Platform secure boot fuse is disabled. - FQXSFPU4072G : Platform secure boot policy is not defined.
Platform secure boot policy is not defined. - FQXSFPU4073G : Platform secure boot fuse is enabled but CPU 1 unfused.
Platform secure boot fuse is enabled but CPU 1 unfused. - FQXSFPU4074G : Platform secure boot fuse is enabled but CPU 2 unfused.
Platform secure boot fuse is enabled but CPU 2 unfused. - FQXSFPU4075G : Platform secure boot fuse is enabled but CPU 1,2 unfused.
Platform secure boot fuse is enabled but CPU 1,2 unfused. - FQXSFPU4076G : Platform secure boot fuse is disabled but CPU 1 fused.
Platform secure boot fuse is disabled but CPU 1 fused. - FQXSFPU4077G : Platform secure boot fuse is disabled but CPU 2 fused.
Platform secure boot fuse is disabled but CPU 2 fused. - FQXSFPU4078G : Platform secure boot fuse is disabled but CPU 1,2 fused.
Platform secure boot fuse is disabled but CPU 1,2 fused. - FQXSFPU4080I : Host Power-On password has been changed.
Host Power-On password has been changed. - FQXSFPU4081I : Host Power-On password has been cleared.
Host Power-On password has been cleared. - FQXSFPU4082I : Host Admin password has been changed.
Host Admin password has been changed. - FQXSFPU4083I : Host Admin password has been cleared.
Host Admin password has been cleared. - FQXSFPU4084I : Host boot order has been changed.
Host boot order has been changed. - FQXSFPU4085I : Host WOL boot order has been changed.
Host WOL boot order has been changed. - FQXSFSM0002N : Boot Permission denied by Management Module: System Halted.
Boot Permission denied by Management Module: System Halted. - FQXSFSM0003N : Timed Out waiting on boot permission from Management Module: System Halted.
Timed Out waiting on boot permission from Management Module: System Halted. - FQXSFSM0004M : An XCC communication failure has occurred.
An XCC communication failure has occurred. - FQXSFSM0007I : The XCC System Event log (SEL) is full.
The XCC System Event log (SEL) is full. - FQXSFSM0008M : Boot permission timeout detected.
Boot permission timeout detected. - FQXSFSR0001M : [arg1] GPT corruption detected, DiskGUID: [arg2]
[arg1] GPT corruption detected, DiskGUID: [arg2] - FQXSFSR0002I : [arg1] GPT corruption recovered, DiskGUID: [arg2]
[arg1] GPT corruption recovered, DiskGUID: [arg2] - FQXSFSR0003G : The number of boot attempts has been exceeded. No bootable device found.
The number of boot attempts has been exceeded. No bootable device found. - FQXSFTR0001L : An invalid date and time have been detected.
An invalid date and time have been detected.
Give documentation feedback