Remove the front I/O expansion board
Follow instructions in this section to remove the front I/O expansion board.
About this task
Attention
- Read Installation Guidelines and Safety inspection checklist to ensure that you work safely.
- Power off the server and peripheral devices and disconnect the power cords and all external cables. See Power off the server.
- If the server is installed in a rack, slide the server out on its rack slide rails to gain access to the top cover, or remove the server from the rack. See Remove the server from rack.
Note
The front I/O expansion board might look different from the illustrations in this section.
Procedure
- If applicable, unfasten the screw that secures the front I/O expansion board heat sink to the chassis.Figure 1. Screw removal
- Unfasten the five screws from the front I/O expansion board, and remove it from the chassis.Figure 2. Front I/O expansion board removal
After you finish
If you are instructed to return the component or optional device, follow all packaging instructions, and use any packaging materials for shipping that are supplied to you.
Demo video
Give documentation feedback