Common components
Follow instructions in this section to remove and install common components in chassis.
Note
The illustrations in this document are for reference only and might differ slightly from your hardware.
- 2.5-inch hot-swap drive replacement
Follow instructions in this section to remove and install a 2.5-inch hot-swap drive. - 2U compute shuttle replacement (trained technician only)
Follow instructions in this section to remove and install the 2U compute shuttle. - 8U GPU shuttle replacement (trained technician only)
Follow instructions in this section to remove and install the 8U GPU shuttle. - Cable cover replacement (trained technician only)
Follow instructions in this section to remove and install the cable cover. - CMOS battery (CR2032) replacement
Follow instructions in this section to remove and install the CMOS battery (CR2032). - Fan replacement
Follow instructions in this section to remove or install a fan. - Fan control board assembly replacement (trained technician only)
Follow instructions in this section to remove or install a fan control board assembly. - I/O cover replacement (trained technician only)
Follow instructions in this section to remove and install the I/O cover. - M.2 drive replacement (trained technician only)
Follow instructions in this section to remove and install an M.2 drive. - Memory module replacement (trained technician only)
Use the following procedures to remove and install a memory module. - MicroSD card replacement (trained technician only)
Follow instructions in this section to remove and install the MicroSD card. - PCIe riser air baffle replacement (trained technician only)
Follow instructions in this section to remove and install a PCIe riser air baffle. - PCIe riser assembly replacement (trained technician only)
Follow instructions in this section to remove and install a PCIe riser assembly. - Power complex replacement (trained technician only)
Follow instructions in this section to remove and install the power complex. - Power distribution board replacement (trained technician only)
Follow instructions in this section to remove and install the power distribution board. - Power supply unit replacement
Follow instructions in this section to remove or install a power supply unit. - Processor air baffle replacement (trained technician only)
Follow instructions in this section to remove and install the processor air baffle. - System I/O board replacement (trained technician only)
Follow the instructions in this section to install or remove the system I/O board. - Processor and heat sink replacement (trained technician only)
Follow instructions in this section to remove and install a processor and a heat sink. - PSU cage replacement (trained technician only)
Follow instructions in this section to remove and install the PSU cage. - PSU interposer replacement (trained technician only)
Follow instructions in this section to remove and install the PSU interposer. - System board replacement (trained technician only)
Follow instructions in this section to remove and install the system board.
Give documentation feedback