Skip to main content

Remove the integrated diagnostics panel

Follow instructions in this section to remove the integrated diagnostics panel. The procedure must be executed by a trained technician.

About this task

Attention
Read Installation Guidelines and Safety inspection checklist to ensure that you work safely.

Procedure

  1. Make preparation for this task.
    1. Remove all the power supply units. See Remove a hot-swap power supply unit.
    2. Remove all the front fans. See Remove a front hot-swap fan.
    3. Remove all the 2.5-inch hot-swap drives and the drive bay fillers (if any) from the drive bays. See Remove a 2.5-inch hot-swap drive.
    4. Pull the 8U GPU shuttle out of the chassis, and place it onto the lift platform. See Remove the 8U GPU shuttle.
    5. Remove the cable cover. See Remove the cable cover.
    6. Remove the I/O cover. See Remove the I/O cover.
    7. Remove the front fan cage. See Remove the front fan cage.
  2. Remove the integrated diagnostics panel.
    1. Press and hold on the two release tabs.
    2. Slightly disengage the integrated diagnostics panel from the 8U GPU shuttle.
    3. Disconnect the cable from the integrated diagnostics panel.
    Figure 1. Integrated diagnostics panel removal
    Integrated diagnostics panel removal
  3. Remove the integrated diagnostics panel from the 8U GPU shuttle.

After you finish

If you are instructed to return the component or optional device, follow all packaging instructions, and use any packaging materials for shipping that are supplied to you.