Remove the integrated diagnostics panel

Follow instructions in this section to remove the integrated diagnostics panel. The procedure must be executed by a trained technician.

Procedure

1. Make preparation for this task.
   1. Pull the system shuttle to the stop position.
      1. Press the two blue release latches.
      2. Rotate the two release levers until they are perpendicular to the shuttle.
      3. Pull the shuttle forward until it stops.
         Figure 1. Pulling the system shuttle to the stop position
         
         
   2. Remove the front fan cage. See Remove the front fan cage.
2. Remove the integrated diagnostics panel.
   1. Press and hold on the two release tabs.
   2. Slightly disengage the integrated diagnostics panel from the system shuttle.
   3. Disconnect the cable from the integrated diagnostics panel.
   Figure 2. Integrated diagnostics panel removal
   
   
3. Remove the integrated diagnostics panel from the system shuttle.