Remove the retimer board shuttle release levers

Follow instructions in this section to remove the retimer board shuttle release levers.

Procedure

1. Disengage the retimer board shuttle from the GPU shuttle.
   1. Press the two blue release latches.
   2. Rotate the two release levers until they are perpendicular to the shuttle.
   3. Slightly slide the shuttle out until it stops to disengage it from the GPU shuttle.
   Figure 1. Retimer board shuttle disengagement
   
   
2. Remove the retimer board shuttle release levers.
   1. Unfasten the screw on the release lever to remove it from the shuttle.
   2. Repeat to remove the other release lever.
   Figure 2. Retimer board release lever removal