Remove the processor air baffle
Follow instructions in this section to remove the processor air baffle. The procedure must be executed by a trained technician.
About this task
Attention
- Read Installation Guidelines and Safety inspection checklist to ensure that you work safely.
- Power off the server and peripheral devices and disconnect the power cords and all external cables. See Power off the server.
- If you intend to install memory modules in the 2U compute shuttle, you must first remove the processor air baffle from the server.
Procedure
- Grasp the processor air baffle and carefully lift it out of the 2U compute shuttle.Figure 1. Processor air baffle removalAttention
- For proper cooling and airflow, reinstall the processor air baffle before you turn on the server. Operating the server with the processor air baffle removed might damage server components.
- Service label is located on the processor air baffle.
After you finish
- If you are instructed to return the component or optional device, follow all packaging instructions, and use any packaging materials for shipping that are supplied to you.
- Remove the M.2 backplane from the processor air baffle. See Remove the M.2 backplane.
Give documentation feedback