Summary of the technical specifications of server. Depending on the model, some features might not be available, or some specifications might not apply.
The server supports one of the following configurations:
Eight AMD MI300X 750W OAM GPUs with 192GB HBM3 memory
Eight NVIDIA H100 700W SXM5 GPUs with 80GB HBM3 memory
Eight NVIDIA H200 700W SXM5 GPUs with 141GB HBM3 memory
Integrated functions and I/O connectors
Lenovo XClarity Controller (XCC), which provides service processor control and monitoring functions, video controller, and remote keyboard, video, mouse, and remote drive capabilities.
The server supports Lenovo XClarity Controller 2 (XCC2). For additional information about Lenovo XClarity Controller 2 (XCC2), refer to Lenovo XClarity Controller portal page.
Front connectors:
One USB 3.1 Gen 1 (5 Gbps) connector
One USB 2.0 connector with XCC system management function
One VGA connector
Integrated diagnostics panel
Power button and power LED (green)
Network Activity LED (green)
System ID button/LED (blue)
System Error LED (yellow)
Rear connectors:
One XCC system management port (10/100/1000 Mbps RJ-45) on the rear to connect to a systems-management network. This RJ-45connector is dedicated to the Lenovo XClarity Controller functions and runs at 10/100/1000 Mbps speed.
One VGA connector
Three USB 3.1 Gen 1 (5 Gbps) connectors
A group of two or four Ethernet connectors on the OCP 3.0 module (optional)
Note
The maximum video resolution is 1920 x 1200 at 60 Hz.
Network
One OCP module, which provides two or four Ethernet connectors for network support
Rear button
NMI button
System fan
Fifteen 80 mm x 80 mm x 56 mm dual-rotor fans
Electrical input
Eight power supplies provide N+N redundancy support.
2600-watt Titanium, input power 200-240 Vac
Important
Power supplies and redundant power supplies in the server must be with the same power rating, wattage or level.
Minimal configuration for debugging
Two processors
Twenty-four memory modules
Eight power supplies
One M.2 drive or one 2.5-inch drive (If OS is needed by debugging)
Fifteen system fans
One OCP module with required cable (if network is required)