Skip to main content

FQXSFIO0013M : New added PCI device(s) at [arg1] triggered [arg2] out of resource.

New added PCI device(s) at [arg1] triggered [arg2] out of resource.

Parameters​

[arg1] String, dynamic string to mention potential PCIe slot(s) or NVMe drive bay(s). i.e. Slot(Bay) 1/2/4/5…etc.

[arg2] Bus /Legacy IO / 32-bit MMIO / 64-bit MMIO

This message is reported when PCI resources are insufficient.

Severity​

Error

User Action​

Complete the following steps:

  1. If resource insufficient is 32-bit MMIO, change System Settings->Devices and I/O Ports->MM Config Base to a lower value such as from 3GB to 2GB or 2GB to 1GB.
  2. If resource insufficient is 64-bit MMIO, change the following settings to disable these two features if not needed. System Settings->Devices and I/O Ports-> SRIOV (or Resizable BAR) to disabled.
  3. Check Lenovo Support site for any applicable service bulletin or UEFI or adapter firmware update that applies to this error.
  4. If the problem persists, remove new added devices from system slots or disable them.
  5. if do need to enable all new added devices, collect Service Data logs, and contact Lenovo Support.