Skip to main content

Complete the parts replacement

Go through the checklist to complete parts replacement

To complete the parts replacement, do the following:
  1. Ensure that all components have been reassembled correctly and that no tools or loose screws are left inside your server.
  2. Properly route and secure the cables in the server. See Internal cable routing for more information on the internal cable routing.
  3. Reinstall the front air baffle and the rear air baffle. See Install the front air baffle and Install the rear air baffle.
  4. Reinstall the rear top cover and the front top cover. See Install the rear top cover and Install the front top cover.
  5. If applicable, reinstall the security bezel. See Install the security bezel.
  6. If the sever was installed in a rack, reinstall the server into the rack. See Server replacement.

  7. Reconnect the power cords and any cables that you removed.

  8. Power on the server and any peripheral devices. See Power on the server.
  9. Update the server configuration.