Disassemble the front cover for recycle

Follow the instructions in this section to disassemble the front cover before recycling.

1. Use a flat tool (such as a screwdriver or blade) to scrape away the protruding part of the following stakes as illustrated:

   • Three hollow stakes

   • Thirty-one spherical stakes

   Figure 1. Removing stakes on the front cover

   
   
   
2. Separate the sheet metal shield from the front cover.
   Figure 2. Separating sheet metal shield on the front cover

   
   
   
3. Use a screwdriver and remove the four screws; then, remove the four latch springs.
   Figure 3. Removing latch springs on the front cover