Skip to main content

Disassemble the system board filler for recycle

Follow the instructions in this section to disassemble the system board filler before recycling.

Before disassembling the system board filler:

  1. Remove the system board filler from the server (see Remove a system board filler).

  2. Refer to local environmental, waste or disposal regulations to ensure compliance.

Complete the following steps to disassemble the system board filler:

  1. Use a screwdriver and remove the six screws (three each side) on the system board filler.
    Figure 1. Disassembling the system board filler

    Disassembling the system board filler
  2. Separate the latches from the system board filler.

After disassembling the system board filler, comply with local regulations when recycling.