Install the front door
Follow instructions in this section to install the front door.
About this task
To avoid potential danger, read and follow the following safety statements.
- S033
CAUTIONHazardous energy present. Voltages with hazardous energy might cause heating when shorted with metal, which might result in spattered metal, burns, or both.
Attention
Read the Installation guidelines to ensure that you work safely.
Before installing the front door, if the server comes with rubber blocks to cover the holes for installing the front door, remove the rubber blocks first. Store the rubber blocks in case that you later remove the front door and need the rubber blocks to cover the holes in the front bezel.
Procedure
Install the front door.
Align the two hooks on the front door with the corresponding holes on the front bezel; then, move the front door in and down until it is secured in place by the hooks.
Close the front door.
Turn the cover lock to the locked position with the front door key.
Figure 1. Installing the front door
After this task is completed
Complete the parts replacement. See Complete the parts replacement.
Demo video
Give feedback