Skip to main content

1762 - Storage Device Configuration Change Has Occurred

Storage configuration (SATA devices and M.2 device) has been changed.

When Configuration Change Detection is enabled, this error message will be displayed when there is any configuration change related to SATA drives (including optical drive) and M.2 drive.
  1. Change the drive SATA connectors will cause this error.

  2. The M.2 drive detected is limited to the M.2 drive connected to the system-board M.2 slots.

  3. To clear this error from the list of POST events, go to Setup Utility and select Save Changes and Exit.