Skip to main content

Install the front bezel

Follow this procedure to install the front bezel.

S002
disconnect all power
CAUTION
The power-control button on the device and the power switch on the power supply do not turn off the electrical current supplied to the device. The device also might have more than one power cord. To remove all electrical current from the device, ensure that all power cords are disconnected from the power source.
About this task
Attention
Watch the procedure
  • A video of this procedure is available at YouTube.

Procedure

Install the front bezel.
  1. Insert the three plastic tabs on the bottom of the front bezel with the corresponding slots on the front of the chassis.
  2. Pivot the front bezel towards to chassis until it snaps into place.
    Figure 1. Installing the front bezel
    Installing the front bezel
After you finish

Proceed to complete the parts replacement, see Complete the parts replacement.