Complete the parts replacement
Ensure that all the removed components have been reinstalled correctly and that no tools or loose screws are left inside the server.
Ensure that the CMOS battery is installed on the system board, see Install the CMOS battery (CR2032).
Properly route and secure the cables in the server. Refer to the cable connecting and routing information for each component.
Reinstall the server cover, see Install the server cover.
If the server was removed from the rack previously, put it back into the rack, see Install the server to the rails.
- Reconnect external cables and power cords to the server.AttentionTo avoid component damage, connect all the other cables before connecting the power cords.
Update the server configuration if necessary.
Go to Lenovo Support - ST50 V2 (including drivers and software) to see the latest firmware and driver updates for your server.
Go to Update the firmware for more information on firmware updating tools.