Signal cable routing
Use the section to understand the signal cable routing for 3.5-inch hot-swap drive backplane.
- 1 x SAS/SATA backplane
This section lists the required components for server models with 1 x SAS/SATA 3.5-inch hot-swap backplane. - 2 x SAS/SATA backplanes
This section lists the required components for server models with 2 x SAS/SATA 3.5-inch hot-swap backplanes. - 3 x SAS/SATA backplanes
This section lists the required components for server models with 3 x SAS/SATA 3.5-inch hot-swap backplanes. - 4 x SAS/SATA backplanes
This section lists the required components for server models with 4 x SAS/SATA 3.5-inch hot-swap backplanes. - 1 x SAS/SATA + 1 x NVMe backplane
This section lists the required components for server models with 1 x SAS/SATA + 1 x NVMe 3.5-inch hot-swap backplane. - 1 x SAS/SATA + 2 x NVMe backplanes
This section lists the required components for server models with 1 x SAS/SATA + 2 x NVMe 3.5-inch hot-swap backplanes. - 2 x SAS/SATA + 1 x NVMe backplane
This section lists the required components for server models with 2 x SAS/SATA + 1 x NVMe 3.5-inch hot-swap backplane. - 2 x SAS/SATA + 2 x NVMe backplanes
This section lists the required components for server models with 2 x SAS/SATA + 2 x NVMe 3.5-inch hot-swap backplanes. - 1 x SAS/SATA + 1 x AnyBay backplane
This section lists the required components for server models with 1 x SAS/SATA + 1 x AnyBay 3.5-inch hot-swap backplane. - 1 x SAS/SATA + 2 x AnyBay backplanes
This section lists the required components for server models with 1 x SAS/SATA + 2 x AnyBay 3.5-inch hot-swap backplanes. - 2 x SAS/SATA + 1 x AnyBay backplane
This section lists the required components for server models with 2 x SAS/SATA + 1 x AnyBay 3.5-inch hot-swap backplane. - 2 x SAS/SATA + 2 x AnyBay backplanes
This section lists the required components for server models with 2 x SAS/SATA + 2 x AnyBay 3.5-inch hot-swap backplanes.
Give documentation feedback