2 x SAS/SATA + 1 x AnyBay backplane
This section lists the required components for server models with 2 x SAS/SATA + 1 x AnyBay 3.5-inch hot-swap backplane.
Connections between connectors; 1↔1, 2↔2, 3↔3, ... n↔n
When routing the cables, ensure that all cables are routed appropriately through the cable guides and cable clips.
Y-cables are shown as individual cables in the illustrations for each backplane.
Secure unused end of Y-cable under the cable clip.
Connect cables prioritizing Gen 4 RAID adapters.
For more information on the cables that are used, see Backplane cable list.
Onboard NVMe/SATA + 1 x 8i RAID/HBA
| NVMe cable routing | ||
|---|---|---|
Figure 1. NVMe cable routing to system board  | ||
| From | To | Cable |
| 1 BP1: NVMe 0-1 | PCIe 1 (onboard) | SlimSAS x8 to MCIO x8 pair (820 mm/780 mm) |
| 2 BP1: NVMe 2-3 | PCIe 2 (onboard) | |
| SAS/SATA cable routing | ||
|---|---|---|
Figure 2. SAS/SATA cable routing to system board and PCIe slot 9  | ||
| From | To | Cable |
| 1 BP1: SAS/SATA | SATA 0-3 (onboard) | SlimSAS x4 to SlimSAS x4 (540 mm) |
| 2 BP2: SAS/SATA | SATA 4-7 (onboard) | SlimSAS x4 to SlimSAS x4 (540 mm) |
| 3 BP3: SAS/SATA |
|
|
Onboard NVMe + 2 x 8i RAID/HBA
| NVMe cable routing | ||
|---|---|---|
Figure 3. NVMe cable routing to system board | ||
| From | To | Cable |
| 1 BP1: NVMe 0-1 | PCIe 1 (onboard) | SlimSAS x8 to MCIO x8 pair (820 mm/780 mm) |
| 2 BP1: NVMe 2-3 | PCIe 2 (onboard) | |
| SAS/SATA cable routing | ||
|---|---|---|
Note Depending on your configuration, the adapter will be installed in top PCIe zone or bottom PCIe zone. Figure 4. SAS/SATA cable routing to top PCIe zone  Figure 5. SAS/SATA cable routing to bottom PCIe zone  | ||
| From | To | Cable |
| 1 BP1: SAS/SATA |
|
|
| 2 BP2: SAS/SATA | ||
| 3 BP3: SAS/SATA |
|
|
Onboard NVMe + 1 x 16i RAID/HBA
| NVMe cable routing | ||
|---|---|---|
Figure 6. NVMe cable routing to system board | ||
| From | To | Cable |
| 1 BP1: NVMe 0-1 | PCIe 1 (onboard) | SlimSAS x8 to MCIO x8 pair (820 mm/780 mm) |
| 2 BP1: NVMe 2-3 | PCIe 2 (onboard) | |
| SAS/SATA cable routing | ||
|---|---|---|
Figure 7. SAS/SATA cable routing to PCIe slot 9  | ||
| From | To | Cable |
| 1 BP1: SAS/SATA |
|
|
| 2 BP2: SAS/SATA | ||
| 3 BP3: SAS/SATA |
|
|
Onboard NVMe + 1 x 24i RAID/HBA
| NVMe cable routing | ||
|---|---|---|
Figure 8. NVMe cable routing to system board | ||
| From | To | Cable |
| 1 BP1: NVMe 0-1 | PCIe 1 (onboard) | SlimSAS x8 to MCIO x8 pair (820 mm/780 mm) |
| 2 BP1: NVMe 2-3 | PCIe 2 (onboard) | |
| SAS/SATA cable routing | ||
|---|---|---|
Figure 9. SAS/SATA cable routing to PCIe slot 9 | ||
| From | To | Cable |
| 1 BP1: SAS/SATA | 24i G3: C0, C1 | Gen 3: Mini-SAS x4*2 to SlimSAS x4*2 (590 mm/590 mm) |
| 2 BP2: SAS/SATA | ||
| 3 BP3: SAS/SATA | 24i G3: C2, C3 | Gen 3: Mini-SAS x4*2 to SlimSAS x4*2 (840 mm/840 mm) |
Onboard NVMe + 1 x CFF RAID/HBA
| NVMe cable routing | ||
|---|---|---|
Figure 10. NVMe cable routing to system board | ||
| From | To | Cable |
| 1 BP1: NVMe 0-1 | PCIe 1 (onboard) | SlimSAS x8 to MCIO x8 pair (820 mm/780 mm) |
| 2 BP1: NVMe 2-3 | PCIe 2 (onboard) | |
| SAS/SATA cable routing | ||
|---|---|---|
Figure 11. SAS/SATA cable routing to CFF RAID/HBA adapter  | ||
| From | To | Cable |
| 1 BP1: SAS/SATA | CFF RAID/HBA: C0 | SlimSAS x4 to SlimSAS x4 (260 mm) |
| 2 BP2: SAS/SATA | CFF RAID/HBA: C1 | SlimSAS x4 to SlimSAS x4 (260 mm) |
| 3 BP3: SAS/SATA | CFF RAID/HBA: C2 | SlimSAS x4 to SlimSAS x4 (720 mm) |