Hardware replacement procedures

This section provides installation and removal procedures for all serviceable system components. Each component replacement procedure references any tasks that need to be performed to gain access to the component being replaced.

The ThinkAgile CP appliances are based on the ThinkSystem SD530 Compute Node and ThinkSystem D2 Enclosure. For hardware replacement procedures not listed in this section, refer to the replacement instructions here:

http://thinksystem.lenovofiles.com/help/topic/7X21/maintenance_manual_hardware_replacement_procedures.html

For more information on ordering parts:

https://datacentersupport.lenovo.com/us/en/products/solutions-and-software/thinkagile-vx/vx3720/7y12/parts

Note

If you replace a part, such as an adapter, that contains firmware, you may also need to update the firmware for that part. Contact Lenovo Support for firmware updates.