Skip to main content

Remote Log Settings

This section allows you to configure the function of saving logs in a remote machine.

To open the Remote Log Settings page, click Settings > Remote Log Settings.

The fields of the Remote Log Settings page are explained below.

  • Remote Log: Check this option to enable the function of saving logs in a remote machine.

  • Port Type: This field is available if Remote Log is enabled. UDP and TCP port types are supported.

  • Remote Log Server: This field specifies the address of the remote server to log system events, which supports the IP address (IPv4 or IPv6) and FQDN formats.

  • Remote Server Port: This field specifies the port to log system events.

    Note
    If the port number is set to 0, the default port will be used, which is port 514.