Removing the bezel

Use this information to remove the bezel.

To remove the bezel, complete the following steps:

1. Read the safety information that begins in Safety and Installation guidelines.
2. Turn off the server (see Turning off the server) and all attached peripheral devices. Disconnect all power cords; then, disconnect all external cables as necessary to replace the device.
3. Unlock the left-side cover, using the key that comes with the server.
   Note

   You must unlock the left-side cover to open or remove the bezel. When you lock the left-side cover, it locks both the cover and the bezel.
4. Open the bezel from the release point on the left edge of the bezel, and remove the bezel away from the server.