Replacing a power interposer redundant power supply card assembly

Use this information to replace a power interposer redundant power supply card assembly.

To install the power interposer for redundant power supply card assembly, complete the following steps:

1. Read the safety information and installation guidelines, see Safety and Installation guidelines.
2. Align the connectors on the power interposer card assembly with the power interposer card connectors on the system board; then, press down on the assembly until it is firmly seated in the connectors on the system board.

   

3. Reinstall the power supply that you removed earlier.
4. Reinstall the cover (see Replacing the server top cover).
5. Slide the server into the rack.
6. Reconnect the power cords and any cables that you removed.
7. Turn on the peripheral devices and the server.