Skip to main content

Replacing the USB/video tray assembly

Use this information to replace the USB/video tray assembly.

To install the USB/video tray assembly, complete the following steps:

  1. Read the safety information and installation guidelines, see Safety and Installation guidelines.
  2. From inside the server, align the USB/video tray assembly with the slot in the server and insert the pin on the side of the tray assembly into the pin hole on the side of the slot for the tray assembly; then, slide it into the slot until it snaps into place and is seated firmly.

    replace usb video tray

  3. Connect the USB/video cable to the system board.
  4. Reinstall the RAID flash power modules, if you removed them earlier (see Replacing a RAID adapter flash power module).
  5. Reinstall the fan cage assembly (see Replacing the fan cage assembly).
  6. Replace the cover (see Replacing the server top cover).