Skip to main content

Removing the LCD system information display panel

Use this information for instructions on how to remove the LCD system information display panel.

To remove the LCD system information display panel, complete the following steps.

  1. Before you begin, read Safety and Installation guidelines .
  2. Turn off the server (see Turning off the server) and all attached peripheral devices. Disconnect all power cords; then, disconnect all external cables as necessary to replace the device.
  3. Remove the storage book from the server (see Removing the storage book).
  4. Disconnect the front operator panel cable from the storage book board.
  5. Slide the blue release latch on top of the front operator panel back to remove the operator panel.

    Illustration of the release latch on the front operator panel
  6. Turn the front operator panel over and disconnect the LCD system information display panel cable from the LCD display panel.
  7. Grasp the tab on the LCD retention latch and pull it to the right to disengage the latch and remove the LCD display panel.

    Illustration of removing the LCD display panel
  8. If you are instructed to return the device, follow all packaging instructions, and use any packaging materials for shipping that are supplied to you.