Removing and replacing Tier 1 CRUs
This topic provides information about removing and replacing tier 1 CRUs.
Replacement of Tier 1 CRUs is your responsibility. If a Lenovo approved warranty service provider installs a Tier 1 CRU at your request, you will be charged for the installation.
The illustrations in this document might differ slightly from your hardware.
- Removing the compute book cover
This information provides instructions on how to remove the compute book cover. - Replacing the compute book cover
This information provides instructions on how to replace the compute book covers. - Removing the standard I/O book
Use this information for instructions on how to remove the standard I/O book. - Replacing the standard I/O book
Use this information for instructions on how to replace the standard I/O book. - Removing the standard I/O book air baffle
Use this information for instructions on how to remove the standard I/O book air baffle. - Replacing the standard I/O book air baffle
Use this information for instructions on how to replace the standard I/O book air baffle. - Removing a RAID adapter flash power module from the storage book
Use this information for instructions on how to remove a RAID flash power module from the storage book. - Replacing a RAID adapter flash power module in the storage book
Use this information for instructions on how to replace a RAID flash power module in the storage book. - Removing the half-length I/O book
This information provides instructions for removing the half-length I/O book. - Replacing the half-length I/O book
This information provides instructions for replacing the half-length I/O book. - Removing the full-length I/O book
This information provides instructions for removing the full-length I/O book. - Replacing the full-length I/O book
This information provides an overview of the full-length I/O book. - Removing an adapter
Use this information for instructions on how to remove an adapter. - Replacing an adapter
Use this information for instructions on how to replacing an adapter. - Removing 2.5-inch and 1.8-inch hot-swap drives
This information provides instructions for removing the 2.5-inch and 1.8-inch hot-swap drives. - Replacing 2.5-inch and 1.8-inch hot-swap drives
This information provides instructions for replacing the 2.5-inch and 1.8-inch hot-swap drives. - Removing the 4x2.5-inch hot-swap drive backplanes
Use this information for instructions on how to remove the 4x2.5-inch hot-swap drive backplane assembly. - Replacing the 4x2.5-inch hot-swap drive backplanes
Use this information for instructions on how to replace the 4x2.5-inch hot-swap drive backplane assembly. - Removing the 8x1.8-inch hot-swap drive backplane assembly
Use this information for instructions on how to remove the 8x1.8-inch hot-swap drive backplane assembly. - Replacing the 8x1.8-inch hot-swap drive backplane assembly
Use this information for instructions on how to replace the 8x1.8-inch hot-swap drive backplane assembly. - Removing a memory module
This topic provides instructions about how to remove a memory module. - Replacing a memory module
This topic provides instructions about how to replace a memory module. - Removing the ServeRAID M5120 SAS/SATA Controller for System x
User this information for instructions on how to remove the ServeRAID M5120 SAS/SATA Controller. - Replacing the ServeRAID M5120 SAS/SATA Controller for System x
User this information for instructions on how to replace the ServeRAID M5120 SAS/SATA Controller. - Removing the N2215 SAS/SATA Host Bus Adapter for System x
User this information for instructions on how to remove the N2215 SAS/SATA Host Bus Adapter. - Replacing the N2215 SAS/SATA Host Bus Adapter for System x
User this information for instructions on how to replace the N2215 SAS/SATA Host Bus Adapter. - Removing a USB embedded hypervisor flash device
Use this information for instructions on how to remove a USB hypervisor flash device. - Replacing a USB embedded hypervisor flash device
Use this information for instructions on how to replace a USB hypervisor flash device. - Removing a 1400-watt or 900-watt hot-swap power supply
Use this information for instructions on how to remove a 1400-watt or 900-watt hot-swap power supply. - Replacing a 1400-watt or 900-watt hot-swap power supply
Use this information for instructions on how to replace a 1400-watt or 900-watt hot-swap power supply. - Removing a hot-swap fan assembly
Use this information for instructions on how to remove a hot-swap fan from the server. - Replacing a hot-swap fan assembly
Use this information for an overview of the fans and instructions on how to install a hot-swap fan in the server. - Removing an ML2 (Ethernet) adapter
Use this information for instructions on how to remove an ML2 (Ethernet) adapter. - Replacing an ML2 (Ethernet) adapter
Use this information for instructions on how to remove an ML2 (Ethernet) adapter. - Removing a RAID adapter flash power module from the standard I/O book
Use this information for instructions on how to remove a RAID adapter flash power module from the standard I/O book. - Replacing a RAID adapter flash power module in the standard I/O book
Use this information for instructions on how to replace a RAID adapter flash power module in the standard I/O book. - Removing a RAID cache card
User this information for instructions on how to remove a RAID cache card. - Replacing a RAID cache card
User this information for instructions on how to replace a RAID cache card. - Removing the system battery
User this information for instructions on how to remove the system battery. - Replacing the system battery
User this information for instructions on how to replace the system battery. - Removing the front I/O panel (USB/video) assembly
Use this information for instructions on how to remove the front I/O panel. - Replacing the front I/O panel (USB/video) assembly
Use this information for instructions on how to replace the front I/O panel.
Give documentation feedback