Removing an adapter

Use this information for instructions on how to remove an adapter.

To remove an adapter, complete the following steps:

1. Before you begin, read Safety and Installation guidelines .
2. Turn off the server (see Turning off the server) and all attached peripheral devices. Disconnect all power cords; then, disconnect all external cables as necessary to replace the device.
3. Remove the I/O book in which the failed adapter is installed. Follow the removal instructions as documented for the I/O book.
4. Disconnect any cables from the adapter.
5. Lift up the adapter retention latch that secures the adapter.
6. Carefully grasp the adapter by its top edge or upper corners, and pull the adapter from the connector and set it aside.
7. If you are instructed to return the adapter, follow all packaging instructions, and use any packaging materials for shipping that are supplied to you.